Flasher Archive

[Previous] [Next] - [Index] [Thread Index] - [Previous in Thread] [Next in Thread]


Subject: RE: [flasher] Tell target problem
From: Ilja Goossens
Date: Tue, 06 Feb 2001 10:46:09 -0000

nothing wrong here

Ilja

-----Original Message-----
From: James Cutts [jamesatinone [dot] co [dot] uk (mailto:jamesatinone [dot] co [dot] uk)]
Sent: Tuesday, February 06, 2001 11:28 AM
To: flasher from chinwag
Subject: [flasher] Tell target problem


Hi List

Apologies for the repeat posting.

Ive been experiencing a problem in Flash 4 with having a button TellTarget
an MC on MouseOver and MouseOut actions.

I have a button (button1) which targets an MC (button1 MC) in the following
way:

On RollOver
Begin Tell Target ("/button1 MC")
GotoAndPlay ("start")
End Tell Target

On RollOut
Begin Tell Target ("/button1 MC")
GotoAndPlay ("fade out")
End Tell Target

"button1 MC" consists of a graphic gradually fading in and out again with
labels at the relevant points: "start" at the start and "fade out" in the
middle.

Basic stuff.

However Flash seems to get confused and if you roll on and off quickly it
gets stuck on the fade out part of the movie.

The .swf is at http://www.inone.co.uk/clients/ravenbourne_web/
The buttons are the ones on the left hand side.

Any ideas?

Yours

J
----------------------------
James Cutts

d e s i g n m a n a g e r
i n o n e n e w m e d i a

Tel: +44 (0)20 7978 6500
jamesatinone [dot] co [dot] uk
http://www.inone.co.uk

G4/450Mhz/384MbRAM/OS9.0.4/Flash4.04a/Flash5/IE5/NN4.08/NN6
----------------------------


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The Chinwag site carries a wealth of Flash resources.
Find useful links, suggested reading and archives at:

** http://www.chinwag.com/flasher **
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You are subscribed to flasher as: iljaatilja [dot] com
To unsubscribe, email leave-flasher-479706Ratlists [dot] chinwag [dot] com



[Previous] [Next] - [Index] [Thread Index] - [Next in Thread] [Previous in Thread]