Flasher Archive
[Previous] [Next] - [Index] [Thread Index] - [Previous in Thread] [Next in Thread]
Subject: | RE: FLASH: Site Design in Flash? |
From: | Tim Layton |
Date: | Mon, 24 Jan 2000 05:45:27 GMT |
Thanks for the advice Laura... I recently purchased the Flash 4 training
tapes from Lynda.com and they went over some of what you outlined in your
response. All of your points are well taken and thanks again.
Tim
-----Original Message-----
From: ownerchinwag [dot] com [ownerchinwag [dot] com]On">mailto:ownerchinwag [dot] com]On Behalf Of Laura
Mollett
Sent: Sunday, January 23, 2000 11:56 PM
To: flasherchinwag [dot] com
Subject: Re: FLASH: Site Design in Flash?
> Tim,
> It would depend entirely on the size of the site.
> In my limited experience I see calling seperate swf's as the best
> solution for having a page load quickly, and still manage to be
> entertaining to the user. But if others have different opinions , I'm
> all ears.
>
> HTH
> -Mark
The biggest consideration is loading sequence. If you know what the user is
going to click next (the site's pretty linear) then it's a fairly simple
matter to make sure that portion is ready to be served when the user is
ready to see it, but if the customer will choose what comes next very
randomly, you have to make sure the whole site is available before any
buttons are clicked, in which case you might as well put it all up as one
movie (since it all has to load that quickly anyway). One thing to remember
is that a movie doesn't load immediately just because a button is pressed -
if it's a large movie it might take some time to load and unless it's
carefully streamed will make the button appear broken (a long wait time
while nothing happens) - so you either need pre-loaders on all the movies,
need them all to stream adequately, or need to have them loaded and "parked"
before the user is going to call them (so they're waiting and the customer
isn't :).
Recently I've discovered another consideration is authoring environment. If
the movie is getting so big my computer doesn't want to handle it well
(memory out crashes, which sometimes means losing the fla file and a lot of
work on my mac) or it's very unwieldy (slow screen redraws because I'm
pretty low on ram and other things of that nature) then I might as well
divide it up into separate movies (sort of like I would scenes) and then
either paste it back together or decide to leave it as separate movies at
the end. Another thing to note is that MSIE 4.5 for the mac is buggy about
levels and loading separate movies might not work on that platform.
hth,
Laura Mollett
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To unsubscribe or change your list settings go to
http://www.chinwag.com/flasher or email helpchinwag [dot] com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To unsubscribe or change your list settings go to
http://www.chinwag.com/flasher or email helpchinwag [dot] com
Replies
Re: FLASH: Site Design in Flash?, Laura Mollett
[Previous] [Next] - [Index] [Thread Index] - [Next in Thread] [Previous in Thread]