Flasher Archive
[Previous] [Next] - [Index] [Thread Index] - [Previous in Thread] [Next in Thread]
| Subject: | RE: FLASH: 10 Tell Targets on one mouseclick |
| From: | Tewes |
| Date: | Fri, 28 Jan 2000 17:57:53 GMT |
I know that Brandon. It�s not the problem of the trace-command, the loop
does�t work at all. It�s like I said:
The variables are:
australia_1=j_a
australia_2=m_s and so on
The frames in the targeted mcs are named the same way: j_a, m_s and so on.
Your loop gives the right targets, but I don�t get the j_a and m_s, what I
get is _level0/australia_1, _level0/australia_2 and so on. I get the correct
names of the variable, but not it�value.
if I say:
Goto and stop _level0/:australia_1
the film will go to the frame j_a, this works. You get, what I mean??
----------------
Kalle Tewes
dpa-Online Grafik
Tel. 040 / 4113 - 2134
> ----------
> From: bhall
figleaf [dot] com> Reply To: flasher
chinwag [dot] com> Sent: Freitag, 28. Januar 2000 6:24 Uhr
> To: flasher
chinwag [dot] com> Subject: Re: FLASH: 10 Tell Targets on one mouseclick
>
> Make the trace an expression as well..
> otherwise it won't reference the variable... just print out its name like
> it
> did.
>
> -= Branden J. Hall
> -= Multimedia Developer/Instructor
> -= Fig Leaf Software
>
> ----- Original Message -----
> From: <Tewes
hbg [dot] dpa [dot] de>> To: <flasher
chinwag [dot] com>> Sent: Friday, January 28, 2000 11:59 AM
> Subject: RE: FLASH: 10 Tell Targets on one mouseclick
>
>
> Hei Brandon,
> thanks for your quick help. It works - but just the half way. i get the
> correct targets but the Trace-command for the australia-variables gives me
> something like _level0/australia_1, a string, no value. I set both, the TT
> and the goto statement to expression.
>
> Kalle
>
> ----------------
>
> Kalle Tewes
> dpa-Online Grafik
>
> Tel. 040 / 4113 - 2134
>
> > ----------
> > From: bhall
figleaf [dot] com> > Reply To: flasher
chinwag [dot] com> > Sent: Freitag, 28. Januar 2000 5:35 Uhr
> > To: flasher
chinwag [dot] com> > Subject: Re: FLASH: 10 Tell Targets on one mouseclick
> >
> > Assuming that this button is in the main timeline.. this will work..
> > otherwise put the path to the MC you are in before the i in the goto
> > statement.
> > (make bot the tell target and the goto and stop values expressions)
> >
> > On (Release)
> > Set Variable: "i" = 1
> > Loop While (i<=10)
> > Begin Tell Target ("/name_"&i)
> > Go to and Stop ("/:australia_"&/:i)
> > End Tell Target
> > Set Variable: "i" = i+1
> > End Loop
> > End On
> >
> > -= Branden J. Hall
> > -= Multimedia Developer/Instructor
> > -= Fig Leaf Software
> >
> >
> >
> > ----- Original Message -----
> > From: <Tewes
hbg [dot] dpa [dot] de>> > To: <flasher
chinwag [dot] com>> > Sent: Friday, January 28, 2000 11:23 AM
> > Subject: FLASH: 10 Tell Targets on one mouseclick
> >
> >
> > Hi all,
> > What I have is:
> >
> > 10 MCs, named name_1, name_2 to name_10
> > 10 variables, named australia_1 to australia_10
> >
> > What I want:
> >
> > Set the 10 MCs WITH ONE MOUSECLICK to the frame with the value of the
> > variables.
> >
> > What I did:
> >
> > Something like
> >
> > On (Release)
> > Set Variable: "i" = 10
> > Set Variable: "c" = 0
> > Loop While (i>0)
> > Begin Tell Target ("/namen_(c+1)")
> > Go to and Stop ("_level0/:australien_(c+1)")
> > End Tell Target
> > Set Variable: "i" = 10-1
> > End Loop
> > End On
> >
> >
> > What happens:
> >
> > Nothing :-)
> >
> > So, I�m not sure about the syntax, though I think, the basic idea can�t
> be
> > completely wrong. Any help??
> >
> > Regards Kalle
> >
> > ----------------
> >
> > Kalle Tewes
> > dpa-Online Grafik
> >
> > Tel. 040 / 4113 - 2134
> >
> > flasher is generously supported by...
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > flashforward2000 and The Flash Film Festival
> > "The World�s Premier Flash Solutions Conference and Expo"
> > March 27-29, Nob Hill Masonic Center, San Francisco, California
> >
> > -Register before Feb 25 and save $200!!-- www.flashforward2000.com
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > To unsubscribe or change your list settings go to
> > http://www.chinwag.com/flasher or email help
chinwag [dot] com> >
> >
> >
> >
> > flasher is generously supported by...
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > flashforward2000 and The Flash Film Festival
> > "The World�s Premier Flash Solutions Conference and Expo"
> > March 27-29, Nob Hill Masonic Center, San Francisco, California
> >
> > -Register before Feb 25 and save $200!!-- www.flashforward2000.com
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > To unsubscribe or change your list settings go to
> > http://www.chinwag.com/flasher or email help
chinwag [dot] com> >
> >
>
> flasher is generously supported by...
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> flashforward2000 and The Flash Film Festival
> "The World�s Premier Flash Solutions Conference and Expo"
> March 27-29, Nob Hill Masonic Center, San Francisco, California
>
> -Register before Feb 25 and save $200!!-- www.flashforward2000.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> To unsubscribe or change your list settings go to
> http://www.chinwag.com/flasher or email help
chinwag [dot] com>
>
>
> flasher is generously supported by...
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> flashforward2000 and The Flash Film Festival
> "The World�s Premier Flash Solutions Conference and Expo"
> March 27-29, Nob Hill Masonic Center, San Francisco, California
>
> -Register before Feb 25 and save $200!!-- www.flashforward2000.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> To unsubscribe or change your list settings go to
> http://www.chinwag.com/flasher or email help
chinwag [dot] com>
>
flasher is generously supported by...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
flashforward2000 and The Flash Film Festival
"The World�s Premier Flash Solutions Conference and Expo"
March 27-29, Nob Hill Masonic Center, San Francisco, California
-Register before Feb 25 and save $200!!-- www.flashforward2000.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To unsubscribe or change your list settings go to
http://www.chinwag.com/flasher or email help
chinwag [dot] com
Replies
Re: FLASH: 10 Tell Targets on one mousec, Branden Hall
[Previous] [Next] - [Index] [Thread Index] - [Next in Thread] [Previous in Thread]
