Flasher Archive

[Previous] [Next] - [Index] [Thread Index] - [Previous in Thread] [Next in Thread]


Subject: Re: [flasher] RE: Swift 3D
From: Joseph Troha
Date: Thu, 25 Jan 2001 01:05:19 -0000

Does Bryce output vector animation / frames ???




On 25/1/01 11:05 AM, "calvomicatWellsFargo [dot] COM" <calvomicatWellsFargo [dot] COM>
wrote:

> I like Bryce
>
> Chelle
>
> calvomatbellsouthips [dot] com
> 925.674.3827
>
> -----Original Message-----
> From: Erik [eheylatneptune [dot] on [dot] ca (mailto:eheylatneptune [dot] on [dot] ca)]
> Sent: Wednesday, January 24, 2001 2:45 PM
> To: flasher from chinwag
> Subject: [flasher] Swift 3D
>
> Hey guys! I'm lookin for a good (but easy) 3D Program to use alongside
> Flash. I've heard Swift 3D is good but also that it gives you problems when
> importing from Flashes .eps format no matter what you draw.
> Thoughts?
>
> Suggestions?
> thanks
>
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> The Chinwag site carries a wealth of Flash resources.
> Find useful links, suggested reading and archives at:
>
> ** http://www.chinwag.com/flasher **
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> You are subscribed to flasher as: calvomicatwellsfargo [dot] com
> To unsubscribe, email leave-flasher-479583Gatlists [dot] chinwag [dot] com
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> The Chinwag site carries a wealth of Flash resources.
> Find useful links, suggested reading and archives at:
>
> ** http://www.chinwag.com/flasher **
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> You are subscribed to flasher as: joeatcreativefactory [dot] com [dot] au
> To unsubscribe, email leave-flasher-479583Gatlists [dot] chinwag [dot] com

Joseph Troha
Creative Factory
Level 3, 30 Inkerman Street
StKilda, Melbourne, Australia
v > +61 3 9593 8882
f > +61 3 9593 8866
mobile > 0407 357 697
joeatcreativefactory [dot] com [dot] au
http://www.creativefactory.com.au

----------------------------------------------------------------
This email message is intended only for the
addressee(s) and contains information which
may be confidential. If you are not the intended
recipient please do not read, save, forward,
disclose, or copy the contents of this email.
If this email has been sent to you in error,
delete email completely and immediately
from your system. Thank You.
----------------------------------------------------------------



[Previous] [Next] - [Index] [Thread Index] - [Next in Thread] [Previous in Thread]