Re: FLASH: Importing graphics from Illustrator

[CMAIII]

In a message dated 98-11-24 14:05:19 EST, you write:


<< I don't know the answer to your question, I'm afraid. But speaking

 of color values, I have one of my own. In a recently created Flash

 site, I used one of the dark greens from the standard web pallet,

 which looked fine on my mac, and ok on the windows machine I

 use at work. However, when the customer was reviewing the site

 design, I noticed the dark green looked black, so for the next

 review, I lightened it, down two, still straight from the Flash pallet.

 It now looks pretty light green on my mac, seems to be just slightly

 dark green on my windows machine, and *still* looks black on the

 customer's windows machine. I checked, and they have colors set

 to 32 bit true color. My work windows machine is only set to 24

 bit true color and it looks ok here, and I thought the standard Flash

 colors were web safe? Any ideas what could be causing this or how

 to fix it?

 

 Thanks,

 Laura Mollett

 

  >>

Hi Laura,

I think this may be a hardware problem.

Just a thought here.....Is it possible that your client's monitor  brightness

and contrast functions may play a part in this?? 

Is it just the green color that is not being drawn up correctly...or are the

other colors sort of out of whack too?

Only other thing is,,,,if its only the green....and i have seen it

before...(but in the red color) is a problem with the actual monitor cable,

where one of the pins is bent or even the video card is flawed or "strained''.

Hope this made a little sense....good luck.


CMA3


------------------------------------------------------------------------

To UNSUBSCRIBE send: unsubscribe flasher in the body of an

email to

list-managershocker [dot] com

.  Problems to:

ownershocker [dot] com

N.B. Email address must be the same as the one you used to subscribe.

For info on digest mode send: info flasher to

list-managershocker [dot] com