Flasher Archive
[Previous] [Next] - [Index] [Thread Index] - [Previous in Thread] [Next in Thread]
Subject: | Re: FLASH: Rotating Globe |
From: | Nathan |
Date: | Sun, 14 Feb 1999 23:53:23 GMT |
The best way create the spining globle is to create the spinning globe in a
3D program and then export as large PICTs. Then all you have to do is a bit
of production work and trace the curves with illustrator - making sure that
you have a box around the frame for registration and that you only roughly
trace the curves. One you have done that you import each traced frame into
Flash.
Check out http://www.vrlx.net - the globe is only 14k.
___________________________________________
Nathan Livingstone Vale
New Media Developer
nathanhyro [dot] com
___________________________________________
HYRO.COM Management Pty Ltd - Australia
Gateway Building 50 Appel Street
PO Box 1167
Surfers Paradise
Qld, 4217
Australia
Telephone +61 7 55380130
Facsimile +61 7 55383720
email adminhyro [dot] com
___________________________________________
HYRO.COM - New York
Facsimile within US (212) 5048142
Telephone within US (212) 5048142
___________________________________________
HYRO.COM - London
Facsimile within UK (171) 6813194
Telephone within UK (171) 6813194
----------
------------------------------------------------------------------------
To UNSUBSCRIBE send: unsubscribe flasher in the body of an
email to list-managershocker [dot] com. Problems to: ownershocker [dot] com
N.B. Email address must be the same as the one you used to subscribe.
For info on digest mode send: info flasher to list-managershocker [dot] com
Replies
Re: FLASH: Rotating Globe, David Gary
[Previous] [Next] - [Index] [Thread Index] - [Next in Thread] [Previous in Thread]