Flasher Archive

[Previous] [Next] - [Index] [Thread Index] - [Previous in Thread] [Next in Thread]


Subject: Re: FLASH: Flash over port 80:
From: John Norcic at Cicron Consulting Australia
Date: Mon, 10 May 1999 16:00:13 +0100

Should do, and would be suprised if they didnt. You might want to check the
proxy setup if your running one.

With a whitepaper I would have a clue. Sorry.

John.

-----Original Message-----
From: Michael J. Buchholz "Buck" <mbuchho1atford [dot] com>
To: flasheratshocker [dot] com <flasheratshocker [dot] com>
Date: Tuesday, May 11, 1999 12:40 AM
Subject: FLASH: Flash over port 80:


>
>Need to confirm streamed Flash files use standard HTTP port 80 to get
>through the firewall. Can anyone point me to a white paper or release that
>says this? Thanks.
>
>- Buck
>
>
>
>------------------------------------------------------------------------
>To UNSUBSCRIBE send: unsubscribe flasher in the body of an
>email to list-manageratshocker [dot] com. Problems to: owneratshocker [dot] com
>N.B. Email address must be the same as the one you used to subscribe.
>For info on digest mode send: info flasher to list-manageratshocker [dot] com
>


------------------------------------------------------------------------
To UNSUBSCRIBE send: unsubscribe flasher in the body of an
email to list-manageratshocker [dot] com. Problems to: owneratshocker [dot] com
N.B. Email address must be the same as the one you used to subscribe.
For info on digest mode send: info flasher to list-manageratshocker [dot] com

[Previous] [Next] - [Index] [Thread Index] - [Next in Thread] [Previous in Thread]